DCA
SPECIFICATIONS |
DCA1222 |
DCA1622 |
DCA2422 |
DCA3022 |
DCA3422 |
Stereo
Mode |
Continuous
Average Output Power per Channel, Stereo Mode
(Both Channels Driven) |
8
ohms/Ch,
20Hz-20kHz, 0.03% THD |
200W |
300W |
425W |
550W |
700W |
4
ohms/Ch,
20Hz-20kHz, 0.05% THD |
325W |
500W |
700W |
900W |
1100W |
EIA: 1kHz ,1%
THD @
8 ohms/Ch
4 ohms
2 ohms |
215W
375W
600W |
325W
550W
800W |
475W
825W
1200W |
625W
1050W
1500W |
800W
1250W
1700W |
Bridge
Mono Mode |
Continuous
Average Output Power, Bridge Mono Mode |
16
ohms,
20Hz-20kHz, 0.1% THD |
400W |
600W |
850W |
1100W |
1400W |
8
ohms,
20Hz-20kHz, 0.1% THD |
700W |
1100W |
1500W |
2000W |
2200W |
4
ohms,
1kHz, 1% THD |
1200W |
1600W |
2400W |
3000W
|
3400W
|
Signal to
Noise
20Hz-20kHz, unweighted |
< -106 dB |
< -107 dB |
< -108 dB |
< -107 dB |
< -107 dB |
Input
Sensitivity
Full Rated Power @ 8 ohms |
1.0Vrms
+2.2dBu |
1.2Vrms
+3.9dBu |
1.5Vrms
+5.5dBu |
1.7Vrms
+6.8dBu |
1.9Vrms
+7.8dBu |
Input
Sensitivity
Full Rated Power @ 4 ohms |
0.9Vrms
+1.3dBu |
1.1Vrms
+3.2dBu |
1.3Vrms
+4.6dBu |
1.5Vrms
+5.7dBu |
1.7Vrms
+6.8dBu |
Output
Circuitry Class Type |
AB |
AB |
2-Step H |
2-Step H |
2-Step H |
Distortion
(SMPTE-IM) |
< 0.01% |
< 0.01% |
< 0.02% |
< 0.02% |
< 0.02% |
All
Models |
Distortion
(Typical)
20Hz-20kHz: 10 dB below rated power
1.0kHz and below: full rated power |
Less than 0.01% THD @ 8 & 4 ohms
Less than 0.01% THD @ 8 & 4 ohms |
Frequency
Response
(LF filter switched off) |
20Hz-20kHz,
± 0.2 dB
8Hz-50kHz, +0/-3 dB |
Damping
Factor
1 kHz and below |
greater
than 500 |
Input
Impedance |
10k
ohms unbalanced, 20k ohms balanced |
Input
Clipping |
10Vrms
(+22 dB) |
Voltage Gain
at 8 ohms |
40x
(32 dB) |
Cooling |
Variable-speed
fan, rear-to-front air flow |
Connectors
(each channel) |
Input:
1/4" TRS, 3-pin XLR & 3-pin detachable terminal block
Output: Neutrik Speakon® and safety-shrouded barrier strip, including
Monitor output |
Controls |
Front:
AC switch, Ch. 1 and Ch. 2 recessed gain knobs
Rear: DIP switch (Clip Limiter On/Off, each channel; LF Filter On/Off,
each channel; LF Filter Freq Select 30 or 50 Hz, each channel; Inputs
Parallel or Stereo; Bridge Mode) |
Indicators |
1
each per channel: CLIP/PROT Red LED, LEVEL -10 dB Green LED, LEVEL -20 dB
Green LED, SIGNAL -35 dB Green LED
BRIDGED Yellow LED, PARALLEL INPUTS Yellow LED, POWER Green LED |
Amplifier
Protection |
Full
short circuit, open circuit, thermal, ultrasonic, and RF protection.
Stable into reactive or mismatched loads. |
Load
Protection |
On/Off
muting, DC-fault power supply shutdown |
Dimensions |
19"
(48.3 cm) rack mounting, 3.5" (8.9 cm) tall (2 rack spaces),
14" (35.6 cm) deep (from front mounting rails) |
Weight |
21
lb (9.5 kg) net |
Optional
Accessories
|
XC-3
Cinema Crossover, for bi-amp applications with all commonly used
cinema speakers
SF-3 Subwoofer Filter, an adjustable highpass filter for
subwoofers
LF-3 Low Frequency Filter, used with the XC-3 for tri-amp
applications |