| Dimensions: |
19"W X 5.25"H X 14"D |
| Line Voltage Requirements: |
85 VAC–260 VAC, 50/60 Hz |
| Accessories Included: |
(1) 6 ft. (2m) UL/CSA line cord |
| |
(1) user manual |
| |
(1) software diskette, 3.5" HD |
| |
|
| Front Panel Controls |
|
| Power Switch: |
(1) rocker switch |
| Monitor Mode Select: |
(1) momentary push button |
| Monitor Channel Select: |
(6 or 8) momentary push buttons |
| Monitor Volume: |
(1) rotary potentiometer |
| Test Lead Connections: |
(2) test point jacks |
| Bypass Mode Select Switch: |
(1) slide switch |
| Diagnostics Button: |
(1) momentary pushbutton |
| Indicators: |
|
| Power Indicator: |
(1) green LED |
| Monitor Mode Indicators: |
(1) green LED and (1) yellow LED |
| Processor Channel Indicators: |
(6 or 8) green LEDs |
| Amplifier Channel Indicators: |
(13 or 20) yellow LEDs |
| Load Fault Indicator: |
(1) red LED |
| Clip Indicator: |
(1) red LED |
| |
|
| Rear Panel Controls |
|
| Bypass Crossover Level: |
(2 or 3) rotary trimpots |
| Surround EX Mode Switch: |
(1) slide switch |
| Rear panel control connectors: |
|
| Input: |
(1) 25 pin female D-sub connector |
| Amplifier DataPorts: |
(8, 11 or 15) 15-pin female high-density |
| |
D-sub connectors |
| RS232 Serial Port: |
(1) 9 pin female D-sub connector |
| Powered Sub/Hearing |
|
| Impaired Output: |
(1) 6 terminal screw-terminal connector |
| Surround EX Insert Point: |
(1) 9 pin male D-sub connector |
| AC Power Inlet: |
(1) IEC style with fuse |
| |
|
| DCM Inputs |
|
| Screen Channels and Subwoofer: |
|
| Input Stage Type: |
Active balanced |
| Input Impedance: |
20 k ohms |
Maximum Input Level
(Screen Channel) |
+14.2 dBu (4.0 Vrms) |
Maximum Input Level
(Subwoofer Channel) |
+18.2 dBu (6.4 Vrms) |
A/D Conversion
(Screen Ch. Only) |
24 bit delta-sigma 128x oversampled |
| Surround Channels: |
Hardwire pass-thru to DataPort outputs |
| |
(via Surround-Ex Insert) |
| |
|
| Dataport Outputs |
|
| Screen Channels: |
|
| Output Attenuation Steps: |
0 dB to-18 dB in 0.1 dB steps |
| Dynamic Range: |
99 dB |
| THD+N 20 Hz-20 kHz, +12 dBu |
|
| Input Level, All Filters Flat: |
0.02% |
| Frequency Response: |
20 Hz-20 kHz (no filtering) |
| D/A Conversion: |
24 bit delta-sigma 128x oversampled |
| Filter Topology: |
24 bit digital IIR filters |
| Crossover Filters: |
Linkwitz-Riley 24 dB/octave digital filters |
| |
programmable in approx. 1 Hz steps from |
| |
150 Hz to 15 kHz |
| Parametric EQ: |
Digital bandpass constant Q filter with |
| |
±10 dB of boost/cut programmable in |
| |
approx. 1/10th octave steps from 80 Hz to |
| |
15 kHz. Q is programmable in 1/10th octave |
| |
steps from 1/10 to 2 octaves. |
| CD Horn EQ: |
Available on high frequency outputs only |
| Screen EQ: |
Available on high frequency outputs only |
| Delay: |
Programmable in 21ms steps from 0 to 21 ms per output |
| Polarity: |
Normal, Inverted |
| Mute: |
Individual mutes on each screen channel output |
| Subwoofer: |
|
| Output Stage Type: |
Single ended (balanced impedance) |
| Output Attenuation Steps: |
0 dB to-18 dB in 3 dB steps |
| Dynamic Range: |
99 dB |
| THD+N 20 Hz-20 kHz, +12 dBu |
|
| Input Level, All Filters Flat: |
0.02% |
| Filter Topology: |
digitally controlled analog on DCM-1, DSP on DCM-2 or 3 |
| High Pass Filter: |
Linkwitz-Riley 12 dB/octave filter. |
| |
Q can be programmed as 0.707 or 2, |
| |
flat or "step-down" operation. |
| Mute: |
One mute for all subwoofer outputs |
| Surround Channels: |
Hardwire pass-through from processor input |
| |
via Surround Insert |
| Output Channels (using the |
|
| Surround Insert connector): |
2 or 3 selectable on rear panel |
| |
|
| Amplifier A.C. Control |
|
| all amps power on with DCM activation |
|
| |
|
| Emergency Bypass Crossover |
|
| Filter Type: |
1st order Butterworth, 2 or 3 way |
| Attenuation Range (trimpot): |
–6 dB to –24 dB |
| |
|
| Powered Subwoofer Output |
|
| Output Stage Type: |
Single ended (balanced impedance) |
| Output Impedance: |
50 ohms |
| Maximum Output Level: |
|
| Loading Requirements (total |
|
| of remote & dataport connection): |
RMIN=2 k ohms CMAX=4 nF |
| |
|
| Hearing Impaired Output |
|
| Output Stage Type: |
Single ended (balanced impedance) |
| Output Impedance: |
50 ohms |
| Nominal output Level: |
–11.8 dBu (200 mVrms) |
| Loading Requirements: |
RMIN=2 k ohms CMAX=4 nF |
| |
|
| Surround Insert I/O |
|
| Output Stage Type: |
Hardwired connection to processor |
| |
input connector |
| Input Stage Type: |
Hardwired connection to DataPort |
| |
output connector |
| |
|
| Monitor Speaker |
|
| Dimensions: |
4-inch full range driver |
| Amplifier Output Power: |
10 watt class AB amplifier |
| Frequency Response: |
100 Hz-8 kHz (±2 dB) |
| Dynamic Processing: |
1.5:1 compression |
| |
|
